Menu
Your Cart

BionicSpot Onyx 3000K Mini

BionicSpot Onyx 3000K Mini
BionicSpot Onyx 3000K Mini
BionicSpot Onyx 3000K Mini
BionicSpot Onyx 3000K Mini
BionicSpot Onyx 3000K Mini
BionicSpot Onyx 3000K Mini
BionicSpot Onyx 3000K Mini
BionicSpot Onyx 3000K Mini
BionicSpot Onyx 3000K Mini
BionicSpot Onyx 3000K Mini
BionicSpot Onyx 3000K Mini
22.90€
  • Stock: In Stock
  • Model: ONYX_BIONICSPOT_3000K_MINI
  • Weight: 0.25g
  • Dimensions: 7.00mm x 8.00mm x 8.00mm

BionicSpot Onyx Mini 3000K with Samsung LM301H horticultural LEDs

The 3000 Kelvin temperature of this lamp provides a warm, yellowish light.

As with all the LEDs in Samsung's horticultural range, its spectrum is complete, covering all the wavelengths required for plant development.

The choice of spectrum (3000K, 4000K or 5000K) only matters if you respect the photoperiod cycles of your plants.

In other words, you are subjecting your plant to a regular, programmed alternation of day and night periods, to enable it to carry out its growth and flowering phases.

In this case, it's a good idea to light the plant with a cool light during growth (5000K) and a warm light during flowering (3000K), to simulate the change of season.

However, houseplants are often located in living areas where it's difficult to maintain a regular light cycle.

In this case, the choice of spectrum is less important, and can be made according to your mood or decoration.




If you want your plants to have regular lighting, even in your absence, we recommend using the BionicTime 164T programmer.

This spotlight can be used as an additional light or as the main light.





Technology


The entire Onyx product range uses the latest generation of Samsung LM301H high-efficiency LEDs.

These chips have been developed specifically for horticultural use, and are part of their Horticulture Lighting Solutions.

More info on Samsung website



Other news


The BionicSpot has an all-aluminium body for efficient, passive and silent heat dissipation.

The spot's E27 base enables it to be installed on a wide range of conventional lamps and brackets.


Power and consumption

The BionicSpot is powered at 220V

Rated power: 10W

Power consumption: 8-10W


Dimensions and technical specifications

Connector: E27

Voltage: 220V

Length: 7cm

Width: 8cm

Height: 8cm

Weight: 250g

The BionicTime T164B is a mechanical timer with bipolar disconnection suitable for high power electrical equipment.Its particularity is that it discon..
17.90€
The BionicSpot Onyx UV based on Samsung 380 nm LED.This lighting can be used at the end of flowering to improve the production of resin.By Indeed th..
15.90€
BionicFlex 60-B
Out Of Stock
The BionicFlex 60 is a 60cm flexible arm for lamps and bulbs. It is equipped with a standard E27 base, a switch and a clamp. The BionicFlex 60 i..
18.90€
The BionicSpot 7-3W-IR is a complementary spotlight with 7x3w leds. With its infrared wavelength this spot is particularly adapted to tri..
19.90€
The BionicFlex 60 is a 60cm flexible arm for lamps and bulbs. It is equipped with a standard E27 base, a switch and a clamp. The BionicFlex 60 i..
18.90€